Connecting your Equipment

1. Serial Number Located in the lower left corner of the bar code. A customer service representative may ask for this number if your system requires troubleshooting in the future.
2. IR Connect to optional VCR Commander service
3. Video Out Connevt to video input of TV or VCR (standard definition)
4. Audio Out Connect to left/right (L/R) audio inputs of a stereo
5. Cable Out Connect to cable input of TV or VCR (standard definition)
6. Cable In Connect to coaxial cable coming from the wall
7. Bypass Connect the optional RF Bypass module
8. AC Switched Outlet Connect the AC power cord from another device, such as a TV
9. AC Power Input Connect the DHCT to an AC electrical outlet using the cord provided
   
   

Connecting your Cable Box and a VCR or DVD

1. The cable from the wall should be connected to the socket on the back of your cable box marked INPUT.
2. A cable now needs to be connected to the other socket on the back of the cable box marked OUTPUT. The other end of this cable should be connected to the INPUT or SIGNAL socket on the back of your VCR.
3. Finally, a jumper cable from the OUTPUT/SIGNAL OUT / TO TV socket on the back of your VCR should run to your Television set.

Connecting your Cable Box directly to your TV Set

1. The cable from the wall should be connected to the socket on the back of your cable box marked INPUT.
2. A Jumper cable now needs to be connected to the other socket on the back of the cable box marked OUTPUT. This jumper cable can now be connected to the back of your Television set.
   
   

Technical Monitoring Cycle or Computer Refreshing

In less than 20 minutes the system cycles through to refresh and download individual subscription requests. CableVision?s computer contacts each customer?s unit individually to refresh and activate operating data, channel identification, etc. This activity enables the Pay-per-View and electronic upgrade features to be handled directly from CableVision?s centre of operation so subscribers can have their channel subscriptions changed without having to wait for a technician.

If the box displays the message L01

If left unplugged for six days or more, your converter box will revert to ?sleep? mode and will display the message L01. To ?wake? the box, simply plug it back into the cable outlet and leave it for approximately 30 minutes.

CableVision has customer service representatives standing by to answer any questions you may have. Call our Customer Care Service Centre at 292-5544. Calls may be forwarded to a dedicated service technician to provide more detailed installation assistance if you require additional help.